售前常见问题
搜索条件
Product: CrowVision 11.6inch SKU: CRV00114L
Question:
I have checked the device . it says its resolution is 1366x768 . so is this the max resolution that can be supported by this display? or it can also support higher resolution also (like 1920x1080)?
Answer:
1366x768 is the max resolution of this device
Product: CrowView SKU: CRV00113L
Question:
What size screen can the CrowView stand fit?
Answer:
Our Crowview supports screens ranging from 13 to 16.6 inches. Its extended length is 28 to 40 cm. Please check the size of your laptop screen.
You can also click the link to view the user manual. https://www.elecrow.com/download/product/CRV00113L/CrowView_Manual.pdf
Product: CrowPanel Advance 7.0-HMI ESP32 AI Display;DIS02170A SKU: DIS02170A
Question:
I have a question regarding the switch settings on the CrowPanel Advance 7.0, I wish to have a tft card plus a nRF2401 module on my display the switches seem to inticate it has to be one or the other ie 10 tft 01 WMmodule 11 is tft plus mic . so thats no good. is it possible to have both
Answer:
You can only choose one of these functions. All the pins have been used up. There are no more leftovers.
but We are planning to launch a new 7-inch display with the ESP32-P4 as the main controller in early September 2025. This device may allow you use TFT card and the module simultaneously. You can explore the product specification after it start to be sold on our website.
Product: CrowPanel 4.3"-HMI ESP32 Display 480×272 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/Platf SKU: DIS06043H-1
Question:
CrowPanel 4.3"-HMI ESP32 Display 480×272 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/MicropythonWithout Acrylic Case
I'm planning to buy this product, I have a question. Can I connect two UARTs to this system, or can I only connect one UART to the other product?
Answer:
This device can be connected to two other MCUs because it has a UART1 port and a UART0 port. See the image below.
The above image is from:
Product: CrowPanel 7.0" -HMI ESP32 Display SKU: DIS08070H-1
Question:
I buy a Display Esp32, I will like to know witch version of the examples I must use
Answer:
For the CrowPanel 7.0" -HMI ESP32 Display, use the version number on the back of the crowpanel to determine which version of the program to use. As shown below:
Product: ThinkNode-M1 SKU: CIL12901M-1
Question:
CIL12901M I am interested in yr ThinkNode-M1, and wonder if it could work as antitheft device outside of the area covered by celphone network. Questions: is yr device equipped with geo-fencing, ie if it is moved out it's position by more than say 5 m radius it will generate an alarm< - can this alarm be send say 200 m to one of yr devices which will be at my home? can it work as LoRa rather than via celphone system, will I need two of yr transceivers, one as position sensor with GPS geo-fencing to generate alarm if moved outside of radius and the other as receiver to pick up this alarm
Answer:
As you mentioned, you can use two devices to achieve this function. The hardware of this device is capable of supporting it. However, our factory firmware does not support electronic fences function. You will need to develop the firmware yourself. Since the software of this device is not open source, I'm sorry that we are unable to provide in-depth technical support for your firmware development.
Product: RC070S ; DIS78950R; SKU: DIS78950R
Question:
could you kindly provide the 3D design file (.stl or similar) for the Elecrow RC070S enclosure/case, so that I can 3D print it and use it to cover the display?
Answer:
We're sorry, we don't have the 3D file for this enclosure. You can design one yourself.
If you have a bulk order, we might be able to apply to the company to have one made for you.( (It depends on whether the company approves this.)
Product: Crowpanel 2.4 inch advance SKU: DIS01624A
Question:
I'm considering buying a CrowPanel Advance series screen. If I don't buy the add-on Wi-Fi module, will I still get standard Wi-Fi?
Answer:
Yes, you can use standard Wi-Fi if you don't purchase a separate wireless module.
This advanced series uses the ESP32-S3 chip, which already has standard Wi-Fi functionality.
Product: Crowpanel 2.8 inch advance SKU: DIS01728A
Question:
I'm considering buying a CrowPanel Advance series screen. If I don't buy the add-on Wi-Fi module, will I still get standard Wi-Fi?
Answer:
Yes, you can use standard Wi-Fi if you don't purchase a separate wireless module.
This advanced series uses the ESP32-S3 chip, which already has standard Wi-Fi functionality.
Product: Crowpanel 3.5 inch advance SKU: DIS01835A
Question:
I'm considering buying a CrowPanel Advance series screen. If I don't buy the add-on Wi-Fi module, will I still get standard Wi-Fi?
Answer:
Yes, you can use standard Wi-Fi if you don't purchase a separate wireless module.
This advanced series uses the ESP32-S3 chip, which already has standard Wi-Fi functionality.